Showing posts with label DIY. Show all posts
Showing posts with label DIY. Show all posts

Friday 24 November 2017

DIY Pattern Paper and Gifting ideas Tutorial by DT Ishani

Hello everyone,

 

Haven't we all sometimes wished that our gifts be unique and custom made? Today I'll share with you how you could make a gift extra special with these handmade gift wrapping pattern paper ideas. 

 

Below is the list of material required before be begin the process.

 

Materials Required

  • Paper Sheets (120 gsm)
  • Stamps (of your choice)
  • Acrylic Block
  • Versamark ink
  • Embossing powder (EP)
  • Anti Static powder tool
  • Brush (to brush off stray EP)
  • Various colour Ink pads 
  • Heat Gun

1.   I started with the sheet of paper (120 gsm). I used a cake slice stamp and also the sentiment for this Pattern paper as I wanted to later turn it into a small box (with Origami) on a Birthday theme. I used few different colours to stamp the cake. Then, I used the eraser end of a pencil and put similar colour polka dots around, along with few gold embossed polka dots.





2.   I took a contrasting paper (120 gsm) and used the same eraser end of a pencil to heat emboss golden polka dots. I made sure to brush off extra powder as finger prints on the paper may attract embossing powder. I suggest, that as you work your way across the sheet keep using anti-static powder to keep static away.



 


3. Similarly, I used different stamps to create a pattern. For the snowflakes, I used white embossing powder and for paisley, I used champagne embossing powder. Pretty simple, right!





  



Favour box

With my pretty papers, I thought of making a favour box. The darker paper shall be the bottom part so the size of the two sheet varies by 0.5 cm. You can change dimensions, just remember that both the sheets are square with half a centimetre difference.

1. I took a sheet that measured 22x22 cms.


2. Folded it in half.

3. Folded again to make it a quarter fold.



4. Then I opened and brought the four edges together at the middle.



5. Then I bought the outer edges and folded at a 1/4th distance at all the sides.

 




6. Then I opened my folds, brought two opposite sides together and tucked in the two open opposite sides.





7. Tucked in both the sides and made edges of the box.





8. Similarly, I did with the bottom part, just that the size was 21.5 x 21.5 cms.

 



9. I assembled them together and my paper savour box was ready.

 






Gift bags

Materials used

  • A4 Sized Pattern paper
  • Glue
  • Punch
  • Ribbon


1. Firstly, I folded the sheet at two places at a distance of 2 cms, that is - on only one side length and breadth.



2. Then I folded the sheet at the middle, in half.



3. I stuck the folded end with Glue at the breadth side of the sheet.

 


4. Then, I folded up from the bottom at a distance of 4 cms.



5.  I opened the folded part and tucked-in the sides as shown in the picture.




6. Then, I folded the upper and the lower flaps and made them overlap at the middle. Later, I stuck the flaps together with the glue.


7.  At the length, I folded the bag at about 3 cms and made a good crease.




8.  Now,  I punched the holes and put the ribbon through it for the handles.







I did a similar bag with the snowflakes pattern paper too.




Hope you will try to do something similar, and put to use your stamps in this creative way. All the  material mentioned above are available at Rainbow Craftykari Store and you can also pre-order by sending an e-mail to rainbowcraftykari@gmail.com

Happy Crafting

Ishani

Wednesday 8 November 2017

Vintage Desk Organiser Tutorial by DT Khushboo


Good morning everyone! I'm Khushboo Gandhi and I'm back this week with my new tutorial post. It's called the 'Desk Organizer' and I've added the vintage theme to it! Our latest challenge is a lot of fun! Create something vintage-y with an old book paper and add flowers too! Fun, yeah!

Since this tutorial could get a little complicated, I've added my finished project here (as you can see below) - to give you an understanding of how my steps led up to this gorgeous organizer!

Now let's get on with the tutorial! And let me know if you need any help with any of the steps.


Note: Extremely pic-heavy post.




Step 1: 

Cut your chipboard in the following sizes: 

  • 1 piece - 12x6.5 inches (for the main back board - with an angular cut at 7 inches on the longer sides and 3.5 inches on the shorter side - so that it gives you an angle as shown in the pic below) 
  • 2 pieces - 3.5x2 inches (for the sides) 
  • 2 pieces - 12x2 inches (one for the base and one to create the 4th side of the pocket) 

  • 1 piece - 6.5x2 inches (for the division in between)

Step 2: 

You will need to cut the following sizes for your structure/construction strips:

  • 5 pieces - 12x1 inches 
  • 15 pieces - 2x1 inches 
  • 3 pieces - 6.5x1 inches 
  • 6 pieces - 3.5x1 inches 
  • 1 piece - 7x1 inches 
  • 1 piece - 5.75x1 inches 
  • 1 piece - 3x1 inches


You will also need the following (for your straps):

  • 1 piece - 7.25x1 1/8th inches 
  • 1 piece - 6x1 1/8th inches



Step 3: 

Score all your strips at 0.5 inches. Add double-sided tape on the back side as shown in the pic below; and miter the edges (the way you would do for your albums). 



Step 4: 

Take your chipboard pieces - base piece (12x2 inches), side pieces (3.5x2 inches) and start joining them with the help of your construction strips (12x1 + 3.5x1) - as shown in the pic below. Always remember to leave 1/8th inches space between two chipboard pieces.

Note: These 3 construction strips are the only ones you need to remove your double-sided tape for and stick both the sides. All the remaining ones henceforth only need to be stuck on one side. The other 0.5 inches will need to be stuck later on when we start sticking everything to make chipboard pocket out of it. 



Back side



Front side 



Step 5: 

Now add your construction strips (3.5x1 + 2x1) to the side chipboard pieces as shown below. You need to add these to the inner side of the pieces.

Reminder: Only remove your double-sided tape on the ONE 0.5 inch of your construction strip. Below pic will help you understand better.

                            Left side                                      Right side

                                  

Step 6: 

Now add the 2x1 inches construction strips to the outer sides of the base chipboard.

                 Left side                                          Right side







Step 7: 

Moving on to the inner side again, add the 12x1 inches construction strip to the base of your biggest chipboard piece (12x6.5 inches). This we will need to attach to the base chipboard (12x2 inches) when we try to make a box out of it.





Step 8: 

Take your second 12x2 inches chipboard piece and stick all the related construction strips - 2 pieces 12x1 inches + 2 pieces 2x1 inches, as shown below.





Step 9: 

Let's move on to our divider portion now. Stick your two 6.5x1 inches construction strip on either side of your 6.x5x2 inches chipboard piece. Next, stick your 2x1 inches strip on top (stick both the sides onto the chipboard) + two 2x1 inches strip at the bottom as shown below.




Step 10: 

Now, remove the backing on your tapes on the lose 0.5 inch of the strips (both horizontal and vertical strips), and stick them to the big base (12x6.5 inches) and the bottom chipboard piece (12x2 inches piece) as shown below.





Step 11: 

Now start sticking all the other pieces together as shown in the below pics. 





Step 12: 

It's now time to stick the second 12x2 inches chipboard piece to seal the 4th side of your pocket. Stick one side of your strip to the bottom of the base and the sides of the strip to the side chipboard pieces. The concept is similar to making a box.



Don't forget to add your 2x1 inches strips vertically to the bottom of your divider portion (as shown in the pic below). When you remove the backing of the tape and close your pocket flap (the 4th side - 12x2 inches piece), this will get attached to it and make sure it's secured into a strong pocket.








Step 13: 

Your base of the organizer is ready. Start covering the remaining sides with the remaining construction strips. After you are done with adding your pattern paper, you will need to add your flaps (in case you want to). For this, take your 7.25x1 1/8th inches + 6x1 1/8th inches strips. Score them equally at every 3rd indentation as shown below.





Step 14: 

Add double-sided tapes to two sides, and fold them in to create a single strip as shown below.



Step 15: 

Score the strip at 1 inches and 1 1/8th inches.


Step 16:

Fold it a little and staple it to the back of your organiser. 


For my piece, I've not added a lock to the strip. I simply let my drawer handle hold the end of the strip.




Voila! Check out some more of my finished project pictures!
























Materials used:

  1. Chipboard 900 gsm
  2. Black cardstock
  3. Glue
  4. Double-sided tape
  5. Old book
  6. Flowers
  7. Metal embellishments
  8. Metal corners
  9. Stapler
  10. Tim Holtz Distress ink (Walnut Stain)
  11. Paper Trimmer
  12. Score Board

Hope you guys enjoyed my creations and the tutorial. Can't wait to see how you add your own twist to this!


Above mentioned products are available at Rainbow Craftykari Store OR you can pre-order the products by sending email at rainbowcraftykari@gmail.com
That's it from me, folks!

Signing out,
Khushboo R. Gandhi